Click image to view full size image
SPECIFICATION | |||||
DEscriptION | UNIT | FT-600KS | |||
INJECTION UNIT | Screw Diameter | mm | φ32 | φ36 | φ42 |
| Maximum Injection Pressure | kg/cm2 | 2051 | 1620 | 1190 | |
| Theoretical Shot Volume | cm3 | 113 | 143 | 194 | |
| Maximum Shot Weight(PS) | g(oz) | 104(3.7) | 132(4.6) | 179(6.3) | |
| Injection Rate | cm3/sec | 63 | 80 | 109 | |
CLAMPING UNIT | Clamping Force | ton | 60 | ||
| Top Platen Size | mm | 610×460 | |||
| Slide Table Size | mm | 450×490 | |||
| Slide Stroke | mm | 500 | |||
| Mold Size | mm | 460×310 | |||
| Minimum Mold Thickness | mm | 200/300 | |||
| Opening Stroke | mm | 250 | |||
| Open Daylight | mm | 450/550 | |||
| Ejector Force | ton | 2 | |||
| Ejector Stroke | mm | 65 | |||
OTHERS | Hydraulic System Pressure | kg/cm2 | 140 | ||
| Oil Tank Volume | L | 245 | |||
| Electric Power | hp(kW) | 10(7.5) | |||
| Barrel Heating Power | kW | 5.55 | |||
| Total Wattage | kW | 13.05 | |||
| Machine Dimensions(approx.) | m | 2.2×1.1×3.0 | |||
| Machine Weight(approx.) | t | 2.3 | |||
Single slide tale injection molding machine
